Articles and short circuiting kits for high voltage posts and overhead lines

Short-circuiting kits There are 13 products.

  • ● Assembly of 4 to 7contact clamps. Capacity Ø 2 to 18 mm. - 3 to 6 clamps assembled on small polyester sticks of 80 cm. - 1 clamp for use with a polyvalent stick (Hexagonal fitting)

  • ● 4 or 5 Light alloy contact clamps type S20/F (SNAP ON) tested for high intensitycurrent, fitted onto insulating fiberglass rods, length 350 mm (or other on demand)with insulating plastic handles.Blocking system moved by galvanized steel screw. Clamping capacity: conductors from 3-30 mm diameter.

  • ● 3x Light alloy clamps type PC 332 with automatic tightening.Clamping capacity: Ø 3÷32 mm.Attack suitable for fitting on the seats of the clamp holder head.The clamps are provided at their lower end with a special mechanical system that allow the release from the clamp holder head only when they are firmly secured on the line conductor, to prevent their...

  • ● 3x Line end clamps type S20 (SNAP ON) made by aluminium alloy tested for high intensity current. Blocking system moved by steel screw. Bayonet tang type DIN for connection to the operating stick. Clamping capacity: Ø 4÷30 mm. The line clamp, that will be connected to the middle phase, is provided with two lateral branches supporting the two other clamps...

  • - Assembly of 5 to 7 female sockets/F.- Bayonet locking and insulating cap.- Extra-flexible braid assembly in 16 mm²- ICC = 4kA/1s.

  • One brass bayonet male plug type SOCKET/M having a bayonet blocking system suitable for the connection ontoinsulated female SOCKET/F of the short circuiting equipment. Covered by insulating synthetic sleeve suitable for outdoor use.- Extraflexible electrolytic copper cable covered by transparent silicone sheath, section 16 mm²- Ground clamp made by press...

  • ● 3x Screw contact clamps type PC2014 jointed and rotating up to 90° on both sides made by brass tested for high intensity current. Hexagonal tang, for insertion on the insulating rod EF attack, and screw clamping made by galvanized steel. Clamping capacity: vertical, horizontal, slanting conductors 6 - 35 mm diameter.

  • Equipment consists of : ● 3 universal clamps type PC/BM :Icc 20 kA/1sFor round conductors : Ø 5 to 40 mmUpright bars (vertical) : 40 x 60 mmFlat bars (Horizontal) : 12 x 60 mm45° slanting bars : up to 28 mm thick

  • For spherical points, Ø 20 or 25 mm. To choose at order

  • Spherical access points for using with short-circuiting equipment

  • Equipment consists of : ● 3 Screw clamps type PC 120/DIN :● 3 Extraflexible electrolytic copper cables, covered by transparent PVC sheath● 3 Ground clamps MT33.● Metallic carrying case.● Insulating fiberglass tube made by synthetic resin reinforced by fiberglass, certified in conformity with IEC 61235.In 2 or 3 elements of 1,5 m to 2m.● Heavy fabric bag...

  • Equipment consists of : ● 3 Screw clamps type PC 560/C :● 3 Extraflexible electrolytic copper cables, covered by transparent PVC sheath● 3 Ground clamps MT33.● Metallic carrying case.● Insulating fiberglass tube made by synthetic resin reinforced by fiberglass, certified in conformity with IEC 61235.In 2 or 3 elements of 1,5 m to 2m.● Heavy fabric bag...

  • Equipment consists of : ● 3 Screw clamps type PC 560/A :● 3 Extraflexible electrolytic copper cables, covered by transparent PVC sheath● 3 Ground clamps MT33.● Metallic carrying case.● Insulating fiberglass tube made by synthetic resin reinforced by fiberglass, certified in conformity with IEC 61235.In 2 or 3 elements of 1,5 m to 2m.● Heavy fabric bag...

Showing 1 - 13 of 13 items