aire de gants isolants en latex naturel, classe 0, destinés aux travaux sous tension ou à proximité de pièces sous tension jusqu’à 1.000 V AC.
The gloves are ergonomically shaped and lightly powdered on the inside to enhance comfort and facilitate putting on and taking off. Each glove is individually numbered and electrically tested. A test report is attached to each individual package.
These latex insulating gloves must be used with suitable leather overgloves to ensure mechanical protection against the risks of cuts, tears, or punctures.
Technical specifications
- Item: ELS 5
- Electrical class: 0
- Maximum operating voltage AC: 1,000 V
- Test voltage: 5,000 V
- Category: RC + arc flash protection
- Material: natural insulating latex
- Thickness: 1.0 mm
- Colour: yellow
- Available sizes: 8, 9, 10, 11, 12
- Test box: class 1 – 4 kA / 0.5 s
- ATPV: 1.966 cal/cm²
- Ergonomic shape
- Slightly powdered inside
- Individually numbered and tested gloves
Compliance
- EN 60903:2003 + AC2:2005
- PPE Regulation (EU) 2016/425
- EN 420:2003 + A1:2009
Category RC
- R: resistance to acids, oil, and ozone
- C: resistance to very low temperatures
Instructions / important notes
The operating voltage must not exceed the maximum permitted voltage for the class of the glove.
No insulating glove should be used if it has not been checked within a maximum period of 6 months.
For class 00 and class 0 gloves, a visual inspection and an air tightness test may be considered sufficient to detect cracks and damage.
In case of intensive use, a check within 90 days is recommended.
Storage
To be kept in the original packaging, in a dry, dark place at room temperature between +5 °C and +35 °C.
Avoid direct exposure to sunlight, intense artificial light, ozone sources, as well as any compression or folding of the gloves.
Recommended accessories
- Mechanical protection leather overgloves
- Cotton undergloves anti-sweat
- Bag or box for storing insulating gloves
- Talc for insulating gloves
- Pneumatic tester for tightness control
