The BIN97007 extraction handle is intended for handling NH / HRC low voltage fuses.
It allows for the insertion and removal of NH fuse elements in suitable fuse bases and holders. Its universal design facilitates the installation and handling of fuses.
The handle is equipped with a leather sleeve designed to protect the hand and forearm from contact with live parts and to limit the risks associated with electric arcs during handling operations.
This product is a mobile personal protective equipment compliant with the PPE regulation (EU) 2016/425. It must be used only by trained personnel, in accordance with applicable safety procedures.
Technical specifications
- Article: BIN97007
- Type: extraction handle for NH / HRC fuses
- Application: NH low voltage fuses
- Compatible fuse sizes: NH000, NH00, NH0, NH1, NH2, NH3
- Variant: with leather sleeve
- Maximum operating voltage: 1,000 V AC / 1,500 V DC
- Use: insertion and removal of NH fuses in bases and holders
- CE marking: 0340
- GS marking: tested safety
- Expected lifespan: minimum 10 years, subject to compliance with usage, transport and storage conditions
Compliance / standards
- PPE Regulation (EU) 2016/425
- DIN 57680 part 4
- VDE 0680 part 4
- DIN VDE 0636-2 / HD 60269-2
- EN 60269-1 / HD 60269-2
- Use by qualified personnel according to DIN VDE 0105-100 and/or EN 50110-1
Notified body
DGUV Test – Testing and Certification Body for Electrical Engineering
Notified body number: 0340
Instructions for use / safety
Before any intervention, disconnect and lock out the power supply when required by the work procedure.
Use on live parts or installations is only permitted up to 1,000 V AC / 1,500 V DC, and only by trained personnel.
Live NH fuses must only be inserted or removed using an NH extraction handle with sleeve, in combination with the necessary additional PPE, including face protection and suitable clothing against electric arc.
The extraction handle must not remain permanently attached to an inserted NH fuse.
Use by untrained persons is not permitted.
Pre-use check
Before each use, check the general condition, proper functioning and absence of visible damage.
Do not use the handle if it is damaged or if there is any doubt about its operation, safety or protective characteristics.
User repairs are not permitted.
Maintenance
Product with no specific maintenance.
Cleaning and disinfection with common cleaning products, without solvent.
Storage and transport
Protect against mechanical stress.
Protect from direct sunlight.
Do not store in areas containing solvents or chemicals.
Ensure that the actuation button does not remain pressed down continuously during storage or transport.
